jQueryScript

Products

Van / Trailer Mounted System

 

 

Application
The cable fault locating van system is used to perform DC high pot/ burn/ proof test, pre-location of fault distance and pin-point of underground cable fault by acoustic method with the help of suitable surge wave receiver in power transmition and distribution networks or service provider companies.
Key Features
  • Fast and precise cable fault location.
  • Modular test system with stand alone equipments
  • Total tests achievable from a single test station.
  • Customer chose for selection of single or three phase system.
  • HV selector switch to ensure proper switching of HV equipments.
  • The operation system is independent from HV section.
  • All required test such as diagnosis of faults, Route tracing, DC/Burn/Proof test, Pre-location and Pin-point, Cable identification are available.
  • Latest pre-location methods such as TDR, SIM/ARM, MIM, ICM and Decay are available.
  • Comprehensive safety measures for optimum safety of operator.
  • Provision of PC and printer for data storage and hard copy of pre-location test result.
  • Cable test / proof test by means of DC voltage up to 70 kV.
  • Optimized surge energy for switchable capacitors values for each range in surge tester.
  • High surge energy of 2000 Joules with 8, 16 & 32 kV max output for easy to pin-point cable faults.
  • Full output energy delivering capacity of surge tester on each selected range.
  • Continues operation for extended period in case of pin-point difficult cable faults.
  • Extended HV output up to 50 meters through heavy duty cable drum.
  • Safety earth monitoring system to provide operator safety.
  • Fully protected operation with safety interlocks.
  • Light weight, small, flexible receiver with high sensitive ground microphone for pin-point of cable fault.
  • High performance cable route tracing system available for tracing of underground power cables up to more than 10 km distance.
  • Identification of wanted cable from the bunch of cables in power network.
  • Cable Drums HV, Mains, Earthing and Aux Earth up to 50mtr. Length.       
  • Power Supply 230V AC + 10%, 50Hz single phase.